These adaptors allow you to install an aftermarket amplifier to your factory head unit. These devices take the speaker level outputs from the head unit and reduce the signal to a level of which an aftermarket amplifier can use without overloading its inputs.

LINK2 Wavtech 2-channel line output converter

Description: 

If you need a high-quality 2-channel line out converter (LOC), but don't require additional features like summing or auxiliary inputs, the link2 is the perfect solution. It is extremely small so it will fit almost anywhere, simplifying installations. Like all Wavtech products, it has OEM load detect for factory systems that require resistance to function properly. The link2 will accept up to 40V RMS through its speaker inputs, while delivering up to 10V RMS of output at less than 50 ohms.

Features: 
  • 2-Channel line output converter (LOC)
  • Differential balanced inputs
  • Low impedance outputs
  • Variable gain adjustments with clip LEDs
  • Auto-turn on via DC-offset or audio signal detect
  • Generated +12V remote output
  • OEM load detect compatible
  • Selectable ground isolation
  • Locking detachable power/speaker terminals
  • Professional grade panel mount RCAs
  • Compact aluminium chassis with detachable mounting tabs
Specs: 
  • OUTPUT VOLTAGE (MAX): >10VRMS
  • OUTPUT IMPEDANCE: <50 OHM
  • INPUT SENSITIVITY: 2-20VRMS, 4-40VRMS
  • MAX INPUT VOLTAGE: 40VRMS
  • FREQUENCY RESPONSE: <5Hz - >100kHz
  • THD+N SPK: <0.01%
  • S/N SPK: >110dBA
  • TURN-ON TRIGGER: +12V, DC-OFFSET & AUDIO DETECT
  • GENERATED +12V OUTPUT: >500mA
  • CHASSIS DIMENSIONS: 29x75x63mm

Weight: 

0.26KG
Manuals & Firmware

Manuals: